 |
Spit C-Mix Polyester Resin
- Styrene free polyester resin; ideal for general purpose internal construction applications with threaded studs up to M16 diameter.
- C-Mix polyester resin offers an incredibly versatile, cost effective fixing solution for low to medium loads in virtually all base materials. C-Mix reinforces hollow materials, cures fast and can be used even in cold temperatures. C-Mix does not expand hence can be used close to edges.
- Ideal for construction fixing applications. Stadium seating, security shuttering, mechanical & electrical services. The 150ml resin fits in any standard mastic gun.
 |
|
 |
Spit Epomax Vinylester Resin
- High performance styrene free vinylester resin with European Technical Approval Option 7 (part 5) for non-cracked concrete. Also, fire tested to TR020.
- Epomax is a low shrinkage, very fast curing resin for medium to high loads, curing in only 40 mins at 20°C. It can be used on virtually all base materials and is ideal for damp conditions. Epomax offers incredibly fast dispensing, even in the cold, and can be used close to edges.
- Typical uses include lift shaft guide rails, fixing machinery, mechanical & electrical services.
|
|
 |
Spit Epobar Vinylester Resin
- High performance styrene free vinylester resin with extended curing time, designed for rebar fixing. Epobar is CSTB Fire Tested and successfully passed tests on water saturated concrete as per NF standard requirements. It is also Diamond Drilling Authorised.
- Epobar is a non-corrosive and odourless resin with a very high bond strength, even in wet concrete. Suitable for internal and external use, Epobar offers incredibly fast dispensing, even in the cold.
- Designed for reinforcement starter bars and concrete repair applications.
|
|
 |
Resin Applicator Gun
- Hand applicator gun for 380ml and 410ml resin cartridges.
- High leverage, robust design makes dispensing of resin less strenuous.
- Use with C-Mix polyester, Epomix & Epobar vinlyester resins.
|
|
 |
BZP Threaded Studs
- Cut to length bright zinc plated studs for use with resin anchoring systems.
- BZP stud is supplied with a nut and washer.
- Use with C-Mix, Epomax and any other chemical resins.
|
|
 |
Perforated Sleeve for Resin Studs
- Perforated sleeve for resin.
- Mesh sleeve for use with resin systems in hollow base materials or overhead applications.
- Any fixing application in hollow base materials.
|
|
 |
Spit Satelis
- Hollow material fixing system for high loads. Use with C-Mix or Epomax chemical resins.
- The satelis creates a large bearing surface to achieve high loads in hollow block, hollow slab or plasterboard. Choice of projecting stud or an internally threaded socket; both self adjust to the wall thickness.
- Perfect for installing hand rails, radiators, signs, electrical switchboards and any other problem application.
|
|
 |
Mixing Nozzle for Resins
- Spare mixing nozzles for the Spit chemical resin range.
- Mixes the resin and catalytic hardener as the product is dispensed through the nozzle.
- Use with C-Mix polyester, Epomax & Epobar vinylester resins.
|
|
 |
Hand Blow Out Pump
- Hand blow out pump for hole cleaning prior to installation of resin fixing systems.
- Use this hand pump to blow out any dust and loose debris after drilling a fixing hole and cleaning with a wire brush.
- For use when using resin anchor systems.
|
|
